Difference between revisions of "DS-30"

From DMS Wiki
Jump to navigation Jump to search
(Adding wavedrom diagram of DS-30X frame.)
(Adding more information about DS-30Y links)
Line 8: Line 8:
 
** Unknown in what way it's different from other variants
 
** Unknown in what way it's different from other variants
 
* DS-30Y
 
* DS-30Y
** Used on CS1000E platform
+
** Used on CS1000E and Meridian 1 platforms
** Unknown in what way it's different from other variants
+
** Carries same traffic as DS-30X but can be combined in groups of 4 to make DS-30Y superloops
 +
** Seems to only be used on smaller platforms (non-DMS), possibly predecessor or smaller alternative to [[DS-512]] links?
  
 
== DS-30X Physical ==
 
== DS-30X Physical ==
Line 20: Line 21:
 
== DS-30X Electrical ==
 
== DS-30X Electrical ==
 
* Signal levels unknown
 
* Signal levels unknown
 +
* Isolation unknown
  
 
== DS-30X Logical ==
 
== DS-30X Logical ==

Revision as of 02:07, 24 February 2017

DS-30 (sometimes DS30) links are used to carry speech and signalling information on DMS, CS1000, Norstar, and BCM products.

Variants

  • DS-30
    • Used on DMS family products
  • DS-30X
    • Used on Norstar Modular platform to interconnect modules
    • Unknown in what way it's different from other variants
  • DS-30Y
    • Used on CS1000E and Meridian 1 platforms
    • Carries same traffic as DS-30X but can be combined in groups of 4 to make DS-30Y superloops
    • Seems to only be used on smaller platforms (non-DMS), possibly predecessor or smaller alternative to DS-512 links?

DS-30X Physical

  • Four wires (arrows are controller <-> card)
    • Tx PCM →
    • Rx PCM ←
    • 5.12MHz Clock →
    • 1kHz Frame Sync →

DS-30X Electrical

  • Signal levels unknown
  • Isolation unknown

DS-30X Logical

  • Clocked at 2.56MHz (half the 5.12MHz clock received from the controller)
  • Carries 32 channels of PCM voice data
  • Each channel consists of a 10-bit word
    • 8 bits of voice data (called a "timeslot")
    • 1 bit of signalling data
    • 1 bit indicating "data valid"
  • Signalling data is sent in 24-bit words, one bit at a time in each channel.
    • Sent in both directions, one on Tx PCM and one on Rx PCM

DS-30X Timing Diagram/Frame Format

Sig = Signalling Bit, DV = Data Valid BitData WordsCh 27Ch 28Ch 29Ch 30Ch 31Ch 0Ch 1Ch 2Ch 3Ch 4Ch 5Ch 6Frame Sync5.12MHz2.56MHzFrame SyncData BitsCh31 DVCh0 Bit7Ch0 Bit6Ch0 Bit5Ch0 Bit4Ch0 Bit3Ch0 Bit2Ch0 Bit1Ch0 Bit0Ch0 SigCh0 DVCh1 Bit7